How to Make Your Own Dog Mask – The Fundamentals

In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques that you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the house, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it is actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what type of paper plate which you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can make certain that nothing will leak when you put the mask on. Make sure that the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.

Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you are done, so you don’t wind up with smudges or smears on your dog.

Then it is time to glue the mask onto your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Make sure that it’s quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you have the mask snugged securely onto the surface of your dog. Don’t make the folds too large or else it could look messy. Once you’ve completed this, you can site then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Make certain that the ears are flat and make certain it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask as your pet security, you will need to do some sanding to be sure that it is safe on your dog. You can do this by sanding off any excess paper that may have been eliminated from your mask.

Leave a Reply

Your email address will not be published. Required fields are marked *

Translate »
Social Share Buttons and Icons powered by Ultimatelysocial